If you do a lot of boondocking (no hookups while camping), then you know battery life is one of the most important things you must plan for, especially if you have a small battery bank. One great way to save a lot of power is to convert your existing incandescent lighting to LED lighting. LED stands for light emitting diode and provides light in a very different way than incandescent or fluorescent lighting sources. The biggest benefit for a boondocker is that LEDs require very little power to operate, so you won't have to be so conscious of switching off lights when you don't need them.
12 Volt Drill
Just how much power can you save by going LED? In a typical travel trailer of say 27 feet with a super slide and a couple of bunk beds, you may have upwards of 20+ 12 watt incandescent bulbs. If you were to have all of these on at one time, you would be drawing around 20 amps of DC power. In a few hours, your single group 24 12-volt battery would be near dead. Even if you had two batteries, you wouldn't have much left to finish out a 2-day weekend without a battery recharge.
12 Volt Drill
Now if you were to replace every interior incandescent bulb in this fictitious travel trailer with a 24 LED array warm color lamp, each drawing 190 mA, the total power consumption drops to 3.8 amps, over 5 times less power consumption. You wouldn't likely replace every incandescent bulb with a 24 LED array lamp but you could and if you did, you would be using 5 times less power, even if you had every light switched on.
There are several different routes you can take when doing the LED lighting mod: individual lights, such as a night or reading light, all or some interior lights, interior and exterior, storage compartments, etc. Much will depend on you budget and coolness factor you are trying to achieve. Replacing every incandescent bulb may just break your piggy bank, but doing a few can still help save some battery power.
Using a single LED for a night light, like in the bathroom, can be a real life saver. Well, it may not save your life but if you have to get up at 2am to go, you won't be blinded by the light and you should be able to go right back to sleep. A single LED connected through a SPST toggle switch mounted on the bathroom light fixture can provide just enough light to do your business.
Perhaps you just want to change a few lights out, like the lights over your bed, that are generally too bright to read by. There are direct replacement LED lamps that require no modification to the lighting fixture, other than swapping bulbs. For this type of LED lamp, use the "warm white" type. The cool white LEDs provide a bluish tint to the light color and may not appeal to your reading tastes. The warm white LEDs provide a yellowish light color very similar to that of a normal incandescent bulb.
If you plan on replacing the main lights inside the RV and have the type of fixtures that contain two bulbs with a switch in the middle, you can replace just one of the bulbs to reduce cost. This way you not only save money, but you also can still provide more light when you need it by switching on the second bulb. For this case, you should consider LEDs that have a wide beam angle, at least 120 degrees. This is the angle at which light is projected from the lamp. The wider the better if you're trying to light up a large area. These lamps are typically configured in a flat package with many LEDs, as many as 36 in some cases. They simply affix to the fixture with Velcro and plug in just like a standard bulb.
Another cool LED mod is to fit a LED rope light under your RVs countertop. Many upscale RVs have this feature as a standard option but there is no reason you can't have this classy look either. First, have someone help you test fit the rope for length, ensuring you have enough for the whole countertop. Then get some double-sided tape and stick it to the cabinet or under the countertop where you want the rope to run. If you have any left over rope, drill a hole the size of the rope's diameter and run the excess through the hole. Just stick the rope to the tape and press firmly. You can also add a switch to control the rope power as well.
A step light is also another easy LED mod that consumes very little power. If you forget to turn it off, you don't have to worry since it can be on for days and still be easy on your battery. You can use a courtesy light or an amber side marker light. These mount with a couple of screws to the underside of the stairwell. Power can be run to an inconspicuous switch inside. Some even have light sensors so they can automatically turn on when it gets dark and turn off in the morning.
Outside compartments are also a great candidate for LED lights. These can be powered through a pin switch so that when you open the compartment door, the light turns on, and then off when you close the door. The color of the LED light is not so important as is the placement of the light. Compartments are usually rectangular in shape, so try and place the LEDs near the corners of the compartment. This way, you will get the most light to all parts of the storage area.
Finally, upgrading your RVs exterior lighting can make for a very clean look as well as improve safety going to the road. LED porch, marker, clearance, backup, turn, and running lights are all candidates for LED replacement. Fortunately for you, many companies, like Bargman for example, now make direct replacement fixtures that include everything you need to perform the upgrade. Just be sure to budget enough since total exterior lighting replacement can run in to the hundreds of dollars.
Tip: LED brake/tail lamps may not work with some older thermal flasher units found on some vehicles. An LED brake/tail lamp will require an electronic flasher/blinker unit which is commonly available at your local auto parts store. Just ask for the electronic equivalent of your thermal flasher.
Upgrade Your RV With LED Lighting
12 Volt Drill
Dec 10, 2011 03:58:25
Click for larger image and other views
>> Click here to update Christmas prices for Hitachi DS12DVF3 12-Volt Ni-Cad 3/8-Inch Cordless Drill/Driver Kit <<
Christmas Sales Hitachi DS12DVF3 12-Volt Ni-Cad 3/8-Inch Cordless Drill/Driver Kit Feature
- Class leading 230 in./lbs of torque to power through the toughest jobs
- 22-stage clutch for high torque and/or precision driving; soft, non-slip elastomer grip for increased user comfort
- Convenient 5-position belt hook features an integrated bit holder
- Includes drill, flashlight, two 1.4Ah batteries, quick charger, carrying case and driver bit
- Compact and lightweight-only 7.5 inches in length and 3.3 pounds; 5-year warranty
Christmas Sales Hitachi DS12DVF3 12-Volt Ni-Cad 3/8-Inch Cordless Drill/Driver Kit Overview
Compact and comfortable best describe this 12V drill from Hitachi that delivers 230 in. lb. of torque while weighing only 3.3 lb. The RPM range on this tool is 0 to 350 in low speed and 1 to 1050 in high speed with a 22 stage torque adjustable clutch. Soft grip handle and convenient belt hook keep the drill comfortable and convenient. This tool comes with 2 batteries, charger, bit set, flashlight, and carrying case.
Christmas Sales Hitachi DS12DVF3 12-Volt Ni-Cad 3/8-Inch Cordless Drill/Driver Kit Specifications
The Hitachi DS12DVF3 12-Volt, 3/8-Inch Driver Drill Kit with Flashlight offers professional-grade performance in a convenient package. The drill has a two-speed transmission and 22-stage clutch that make it ideal for working in wood, plastic, mild steel, and aluminum. And with a compact, lightweight design, the drill reduces user fatigue and fits into tight spaces. In addition to the drill, the DS12DVF3 kit includes a bit set, flashlight, quick charger, and more.
DS12DVF3 Driver Drill Kit
Tool Specifications |
| | Chuck Size | 3/8-inch | | Drilling Capacity - Wood | 1-inch | | Max Torque | 230-inches/lbs | | No-Load Speed | 0-350, 0-1,050 RPM | | Clutch Stages | 22 | | Tool Length | 7.75-inches | | Tool Weight | 3.3 lbs | | Bit Holders | 2 | | Battery Capacity | 1.4 Ah | | Charger - Volts Accepted | 9.6 - 18 V | | Charging Time | 30 min |
|
|
22-stage clutch offers easy adjustments for driving in wood, plastic, steel, and aluminum. View larger. |
Kit includes high-quality flashlight, battery charger, and seven-piece bit set.
View larger. |
Powers Through the Toughest Jobs with PrecisionThe DS12DVF3 Driver Drill offers class-leading maximum torque of 230 in/lbs, so you can power through wood up to one inch thick. And two-speed transmission is controlled by a one-touch speed knob that lets you choose the right setting for your job--either 0-350 RPM or 0-1,050 RPM.
Also, a 22-stage clutch offers easy adjustments for high torque and precision driving in wood, plastic, steel, and aluminum. And with tool-less clutch adjustment, this drill handles precision fasteners, such as drywall screws, without damaging walls.
Compact, Ergonomic Design for Easy Handling
The DS12DVF3 has all the power you need and is still lightweight and compact enough to provide superior handling. At just 7-3/4 inches in length and weighing just 3.3 pounds, this tool reduces user fatigue and can be used on a ladder or in tight spaces where larger cordless drills can't reach. An added bonus, a non-slip elastomer grip provides comfort and safety.
Adding to this drill's easy-handling features is a 3/8-inch keyless chuck that allows for easy bit changes, as well as a patented five-position belt hook--with two bit holders--that saves time and adds convenience.
Everything You Need in One Package
The DS12DVF3 Kit includes more than just the cordless driver drill. It also includes a high-quality flashlight and a seven-piece bit set to get you started immediately. For further convenience, a protective carrying case stores it all for easy portability from job to job.
Long-Lasting NiCD Batteries Charge in 30 Minutes
The DS12DF3 kit's driver drill and flashlight run on 1.4-Ah nickel cadmium (NiCD) batteries (included), which offer longer runtimes and fewer charges than traditional batteries.
The kit's quick charger fully charges the batteries in just 30 minutes, and you can expect about 300 charges over the life of each battery. An added bonus, the charger is compatible with other Hitachi tools that use NiCD rechargeable batteries (up to 18 volts).
The Hitachi DS12DVF3 Driver Drill Kit with Flashlight is backed by a five-year warranty.
What's in the Box
DS12DVF3 Driver Drill, driver bit, seven-piece bit set, flashlight, two 1.4-Ah batteries, quick charger, and carrying case.
SAVE NOW on Christmas Sales Offers below!
Available In Stock. |
| This Christmas Hitachi DS12DVF3 12-Volt Ni-Cad 3/8-Inch Cordless Drill/Driver Kit ships for FREE with Super Saver Shipping. |
|
Limited Offer Today!! Hitachi DS12DVF3 12-Volt Ni-Cad 3/8-Inch Cordless Drill/Driver Kit Christmas and Cyber Monday 2011 Deals
Wizard Of Oz Lunch Box Flip Down Tv Dvd Player
